The following work is what we do at the Magdalen Islands’ workshop. All work is done by the available recommendations of the engine’s maintenance manual or from the manufacturer’s service bulletin.
On the pistons:
- Cleaning
- Compression ring dimensional inspections
- Removing the piston skirt and piston crown
- Replacement of damaged parts
- If needed, replacement of the entire piston
- Survey report
- Reconditioning the compression rings
On end bushes
- Dismantling and inspection
- Cracking test
- Dimensional inspection
- Socket replacement
- Survey report
On big end bearings
- Cleaning
- Geometric statements
- Survey report
- If needed, crown replacement
- If needed, tightening bolt replacement
